| View previous topic :: View next topic |
| Author |
Message |
shano
Joined: 26 Jan 2006
Posts: 364
Location: OAR #125
|
 Posted: Tue Apr 25, 2006 12:54 pm Post subject: AQD 2141 (90deg) |
  |
|
Aquadopp 2141 rec'd at SIO April 2006 (new)
90 deg head
161Mb memory
1MHz head |
|
| Back to top |
|
 |
shano
Joined: 26 Jan 2006
Posts: 364
Location: OAR #125
|
| Posted: Fri May 05, 2006 2:11 pm Post subject: May 2006 |
|
|
deployed A2141 at Beacons site 04May 2006.
This sensor is questionable wrt pressure signal. It was bucket tested prior to deployment along w/ AQD0600. Both showed spikes in the pressure data while sitting for a few hours. We decided to deploy AQD2141 as we needed to recover the Beacons sensor asap. |
|
| Back to top |
|
|
shano
Joined: 26 Jan 2006
Posts: 364
Location: OAR #125
|
| Posted: Tue Jun 13, 2006 1:35 pm Post subject: Re: AQD 2141 (90deg) |
|
|
06June 2006 - recovered sensor from Beacons deployment site.
Data looked good. v1.15 firmware produced no spikes as did the previous Beacons dataset which used AQD0709 and v1.15 firmware. Appears as though some incompatibility exists between "older" sensors using the 1.15 firmware.
Related sidenote: Vectors with new style Nortek compass will not work w/ firmware < v1.15 |
|
| Back to top |
|
|
spencer
Joined: 31 Jan 2006
Posts: 316
Location: Hydraulics Lab
|
| Posted: Thu Jan 24, 2008 4:34 pm Post subject: AQD 2141 (90deg) Bulkhead connector |
|
|
24-Jan-2008
Bulkhead connector had to be replaced due to cracks in the old one.
Impulse connector #LPMBH-8-FS 3/4"TL - $140.00 from Impulse.
Contact:
Stan Logan
Impulse Enterprise
8254 Ronson Road
San Diego, CA 92111
Tel: 1-800-327-0971
+1-858-565-7050
Fax:+1-858-565-1649
_________________
--spencer |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
